Gear Wheel

• For liquids up to 200 bar
  
  Flows ranges 0.02 to 150 l/min. 1-2500 cSt
  
  Connection 1/4" to 1"
  
  

Calorimetric

No moving parts

Wetted parts in stainless steel 

Simple installation of set point

Calorimetric

For liquids up to 200 bar

No moving parts

Wetted parts in stainless steel

Turbine

For liquids up to 250 bar

Flow from 0.1 to 68 m3/h (1-5 cSt)

Connection from 1/2" to 2"

Entirely in stainless steel

Electromagnetic (Magflow)

• 
  0,085..28,274,3 m3/h
  
  3/8" up to 40" pipe size
  
  1,6 MPa
  
  Acids, alkalis, paints, pastes, water etc
  
  4-20mA or Pulse/frequency

The GF 2581 FlowtraMag is a full-bore plastic PVC in line style magnetic flowmeter. The PVC body with Titanium or Hastelloy® C electrodes has no moving parts, and is two to three times lighter in weight compared to traditional metal magmeters on the market. It is designed for high accuracy flow measurement in short pipe runs, making it an ideal solution for industrial applications where performance and ease of use are important. 

No moving parts

Reduced straight run requirements, ideal for final effluent lines, wellheads and skids

Lighter in weight compared to traditional metal magmeters

One device with three different outputs: field select-able frequency or Digital (S³L), and analog 4 to 20 mA in both passive and active configuration

On-the-fly configuration with GF Config Tool Bluetooth® App

Simple to install with time-honored reliable performance, Signet 515 and 2536 Rotor-X Paddlewheel Flow Sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. Signet 515 and 2536 sensors measure liquid fl ow rates in full pipes and can be used in low pressure systems.


Installs into pipe sizes DN15 to DN900 (½ to 36 in.

PVC 2536 version DN15 to DN100 (½ to 4 in.) for concentrated Sodium Hypochlorite 12.5% applications

High resolution and noise immunity

Chemically resistant materials

The 2551 Magmeter measures the flow rate in a full pipe by monitoring the voltage produced when the (conductive) fluid moves through a magnetic field. Output options include a traditional frequency signal, a serial data (Digital (S3 L)) output, and a 4 to 20 mA output. The 2551 Magmeter is available in three sizes that will accommodate pipes from ½ inch through 36 inch diameters. Select from three different material combinations to match the Magmeter to the application requirements. 

DN15 - DN900 (½ to 36 in.)

10.3 bar @ 25 °C (150 psi @ 77 °F)

0.05 - 10 m/s (0.15 to 33 ft/s)

Optional relay outputs

4 - 20 mA, or frequency/digital (S³L) outputs

Paddle

Switching range 1,3..35 l/min

Water (oils, gases and aggressive media available on request)

G⅜" up to G2"

Brass or stainless steel wetted parts

Max pressure 25 bar

Paddle

Switching Range 3,5..69 l/min H₂O

Water (oils, gases and aggressive media available on request)

G⅜" up to G2"

Brass or Stainless Steel Wetted Parts

Max Pressure 25 bar

Paddle

Switching Range 4..93 l/min H₂O

Water (oils, gases and aggressive media available on request)

G⅜" up to G1"

Brass or Stainless Steel Wetted Parts

Max Pressure 25 bar

Paddle

Switching Range 0,2...165,7 m3/h

Water (oils and aggressive media available on request)

Male Thread R1"

Brass or Stainless Steel Wetted Parts

Max Pressure 11 bar

Piston

Swittching Range 0,04..3 l/m H₂O

Water (gas and aggressive media available on request)

G¼"

Brass or Stainless Steel Wetted Parts

Max Pressure 300 bar

Double acting or spring return

ATEX available on request

Double acting or spring return

Sizes 3/8" to 2"

Pressure range 0 to 16 / 25 bar

Temperature range -10°C to +60°C

ATEX available on request

Normally closed

Working pressure 0 to 24 bar

Housing in brass or stainless 

Normally closed, normally open

Working pressure 0 to 40 bar

For temperatures up to +250 °C

For viscosity up to 5,000 cSt

Normally closed, normally open

Extremely compact version

Working pressure 0 bar to 16 bar

Housing in stainless