Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
There are 181 products.
Active filters
The ESI Technology HP1000 high pressure sensors extends the ESI pressure range up to 4000 bar whilst still maintaining an high performance level.
Stainless steel body
The 0196/0197 series is a compact pressure switch and is part of the changeover contact range from SUCO. Offering a maximum voltage of 24 V (gold contacts) with a normally open and normally closed contact housed in a hex 27 stainless steel body offering offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs and mobile hydraulics
Up to 24 V
Spade terminals
Five adjustment ranges from 0,5..5 bar to 50..200 bar
Changeover (SPDT) with gold contacts
Over pressure safety of 300 bar up to 600 bar
The Model H23 is a three way normally closed (3/2 NC) high pressure dual-operator stainless steel solenoid valve with 1/8 NPT or 1/4" NPT ports in a manifold body. Various coil options available.
1/4" NPT porting
Grommet or 1/2" NPT conduit
Precision stainless free floating plunger
10,000 PSI burst pressure
The ESI Technology LP1000 pressure sensor is designed for low pressure measurement applications whilst still maintaining high performance.
Piezoresistive sensor technology for high performance
Low pressure measurement from 50 mbar
Low hysteresis and excellent long term stability
Robust stainless steel construction for durability
Long service life
The 0180/0181 series is a compact pressure switch and is part of the changeover contact range from SUCO. Offering a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs, mobile hydraulics, water systems, hydraulics generally and pneumatics.
Up to 250 V
Spade terminals
Five adjustment ranges from 0.3-1.5 bar to 50-200 bar
Changeover (SPDT)
Over pressure safety from 100 bar up to 600 bar
The H24 is a three way normally open (3/2 NO) stainless steel solenoid valve (based on model H22). DC only. This valve allows the same media control as a standard three way normally open valve but at a much higher pressure rating 1000 PIS.
1/8" and 1/4" NPT
Grommet and 1/2" NPT conduit
Precision stainless steel plunger
6000 PSI burst pressure
The PR3100 is constructed from stainless steel which incorporates thick film, ceramic and bonded strain gauge technology. This offers excellent stability and accuracy over a long service life. On request this is also available in corrosion resistant materials. The available pressure range options are from 0-1Bar to 0-600Bar.
Stainless steel body
The 0186/0187 series pressure switch is part of the changeover contact range from SUCO. Offering a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and also adjustable on site and can come pre-set.
Common applications include medical, chemical and water applications
Up to 250 V
Spade terminals
Five adjustment ranges from 0,5..5 bar to 50-200 bar
Changeover (SPDT)
Over pressure safety of 300 bar or 600 bar
Robustly constructed from stainless steel the PR3110EX range incorporates the latest silicon strain gauge technology together with a custom IC amplifier offering excellent stability and accuracy over a long service life.
IP65
The 0184/0185 series is part of the changeover contact range from SUCO with an integrated plastic body and connector. Offering a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs, mobile hydraulics, water systems, hydraulics generally and pneumatics.
Up to 250 V
Connector included (DIN 43650/Form A)
Five adjustment ranges from 0,3..1,5 bar to 50..200 bar
Changeover (SPDT)
Over pressure safety from 100 bar up to 600 bar
The PR3200 differential pressure transmitter has two titanium alloy Silicon-on-Sapphire sensors, this offers a high performance with the true wet/wet operation. This is suitable for all liquids and gases compatible with stainless steel and titanium. Applications for this range include flow measurement for orifice plates and mass flow meters, plus static differential pressure measurement and control in combustion chambers.
The 0184/0185 series is part of the changeover contact range from SUCO with an integrated plastic body and connector. Offering a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 stainless steel body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs, mobile hydraulics, water systems, hydraulics generally and pneumatics.
Up to 250 V
Connector included (DIN 43650/Form A)
Five adjustment ranges from 0,5..5 bar to 50..200 bar
Changeover (SPDT)
Over pressure safety of 300 bar or 600 bar
The PR3202 air differential pressure transmitter gives you a precise solution for low pressure sensing, and is fully temperature compensated for unrivaled stability at very low pressures. Housed in a RFI protected shielded mountable box for EMC security, these transmitters combine exact measurement for control at extremely low pressure, with the robustness and adaptability for industrial and commercial installations.
IP67
The 0132/0133 series pressure switch is part of the integrated connector range from SUCO offering high IP rating. Integrated TE AMP Superseal 1.5® connector and a maximum voltage of 48 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Up to 48 V
TE AMP Superseal 1.5® integrated connector
Five adjustment ranges from 0,3..1,5 bar to 50..200 bar
Changeover (SPDT)
Over pressure safety from 100 bar up to 600 bar
Robustly constructed from stainless steel, the PR3800 series incorporates the latest strain gauge technology together with a custom IC amplifier offering excellent stability and accuracy over a long service life.
Thick film sensor technology for long service life
Pressure ranges up to 400 bar
Up to 250°C media temperature option
Easy clean flush membrane to prevent clogging
IP67
The 0134/0135 series pressure switch is part of the integrated connector range from SUCO offering high IP rating. Integrated M12x1 connector and a maximum voltage of 48 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Up to 48 V
M12x1 integrated connector
Five adjustment ranges from 0,3..1,5 bar to 50..200 bar
Changeover (SPDT)
Over pressure safety from 100 bar up to 600 bar
The PR3850 pressure transmitter has been designed to meet the requirements of the majority of industrial pressure measurement applications where a hygienic flush diaphragm connection is required. Robustly constructed from stainless steel this range of pressure transmitters incorporates the latest strain gauge technology together with a custom IC amplifier offering excellent stability and accuracy over a long service life. Output options include 0-5Vdc, 0-10Vdc and 0-20mA.
Thick film sensor technology for long service life
Pressure ranges up to 400 bar
Up to 85°C media temperature
Easy clean flush membrane to prevent clogging
IP67, IP6K9K
The 0136/0137 series pressure switch is part of the integrated connector range from SUCO offering high IP rating. Integrated Deustch DT04-3® connector and a maximum voltage of 48 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Up to 48 V
Deutsch DT04-3P® integrated connector
Five adjustment ranges from 0,3..1,5 bar to 50..200 bar
Changeover (SPDT)
Over pressure safety from 100 bar up to 600 bar
