Suco 0544 Electronic Pressure Switch
Multiple Pressure options available
High over pressure protection
Adjustable pressure
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
There are 181 products.
Active filters
Multiple Pressure options available
High over pressure protection
Adjustable pressure
IP65
The 0140/0141 series is a compact pressure switch and is part of the changeover contact range from SUCO. Including polyamide cap and a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs, mobile hydraulics, water systems, hydraulics generally and pneumatics.
Up to 250 V
Includes Polyamide Cap
Ranges from 0,3..1,5 bar to 50...150 bar
Changeover (SPDT)
Over pressure safety from 300 bar up to 600 bar
The Model EH21 is a two way normally open (2/2 NO) high pressure stainless steel solenoid valve with 1/8" NPT ports in either a standard or manifold body, suitable for hazardous locations. Various coil options available.
Standard 1/8" NPT other ports available
Flame-Proof Construction with 1/2" NPT conduit
Precision stainless steel rocker arm
5000 PSI burst pressure
The 2551 Magmeter measures the flow rate in a full pipe by monitoring the voltage produced when the (conductive) fluid moves through a magnetic field. Output options include a traditional frequency signal, a serial data (Digital (S3 L)) output, and a 4 to 20 mA output. The 2551 Magmeter is available in three sizes that will accommodate pipes from ½ inch through 36 inch diameters. Select from three different material combinations to match the Magmeter to the application requirements.
DN15 - DN900 (½ to 36 in.)
10.3 bar @ 25 °C (150 psi @ 77 °F)
0.05 - 10 m/s (0.15 to 33 ft/s)
Optional relay outputs
4 - 20 mA, or frequency/digital (S³L) outputs
General Pressure Sensor
The ESI Technology GS4200 pressure sensor is designed to meet the operational requirements of demanding pressure measurement applications where good quality, fast delivery and low cost are of the highest priority.
Silicon-on-sapphire sensor technology
Pressure ranges up to 25 bar
Umblemished track record of reliability
Titanium wetted parts
Ideal choice for mobile hydraulic applications
Functions in a wide range of temperatures
All welded design
High reliability, accuracy and process monitoring
Basic changeover switch
The 0170/0171 series is a compact pressure switch and is part of the changeover contact range from SUCO. Offering a maximum voltage of 42 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs, mobile hydraulics, water systems, hydraulics generally and pneumatics.
Up to 42 V
Spade terminals
Five adjustment ranges from 0.3-1.5 bar to 50-200 bar
Changeover (SPDT)
Over pressure safety from 100 bar up to 600 bar
The Model H21 is a two way normally open (2/2 NO) high pressure stainless steel solenoid valve with 1/8" NPT ports in either a standard or dual-operator manifold body. Various coil options available.
Standard 1/8" and 1/4" NPT other ports available
Grommet and 1/2" NPT conduit
Orifice guides the sealing pin for perfect alignment
10,000 PSI burst pressure
General Pressure Sensor
The ESI Technology GS4200 pressure sensor is designed to meet the operational requirements of demanding pressure measurement applications where good quality, fast delivery and low cost are of the highest priority.
Silicon-on-sapphire sensor technology
Pressure ranges up to 1,500 bar
Umblemished track record of reliability
Titanium wetted parts
High over pressure and burst pressure
Multiple pressure options available
Stainless Steel design
Functions in a wide range of materials
Stainless steel body
The 0164 series pressure switch is a stainless steel bodied pressure switch from SUCO which is more rugged for pressure montioring when using corrosive media or for more hygienic applications. Offering a maximum voltage of 42V with normally open or normally closed contacts housed in a hex 24 stainless steel body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and also adjustable on site and can come pre-set.
Up to 42 V
Spade or screw terminals
Five adjustment ranges from 0,1..1 bar to 20..50 bar
Normally open or Normally closed
Over pressure safety of 600 bar
The Model H22 is a two way normally closed (2/2 NC) high pressure stainless steel solenoid valve with 1/8" NPT or 1/4" NPT ports. Various body and coil options available.
Standard 1/8" and 1/4" NPT other ports available
Grommet and 1/2" NPT conduit
Orifice guides the sealing pin for perfect alignment
10,000 PSI burst pressure
Data Logger
The ESI Technology GS4200-USB digital pressure transducer has been designed to measure, analyse and record pressure directly on to a computer without the need for costly I/O interface boards. It allows up to 16 sensors to be monitored simultaneously and to create customised test certificates or export the data to excel.
High pressure
The 0183 series is a high pressure version pressure switch and is part of the changeover contact range from SUCO. Offering a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs, mobile hydraulics, water systems and high pressure systems.
Up to 250 V
Spade terminals
Two adjustment ranges of 100..300 bar & 200..400 bar
Changeover (SPDT)
Over pressure safety of 600 bar
The Model EH22 is a two way normally closed (2/2 NC) high pressure stainless steel solenoid valve with 1/8" NPT or 1/4" NPT ports, suitable for hazardous locations. Various body and coil options available.
Standard 1/8" and 1/4" NPT other ports available
Flame-Proof Construction with 1/2" NPT conduit
Precision stainless steel, free floating plunger
5000 PSI burst pressure
The ESI Technology HI2200 & HI2300 high temperature pressure sensor series is designed to operate in applications with high demands on media and ambient temperature effects.
Silicon-on-sapphire sensor technology
Media temperature up to 200°C
Ambient temperature up to 200°C
Good chemical compatibility for a range of applications
Gold contacts
The 0190/0191 series is a compact pressure switch and is part of the changeover contact range from SUCO. Offering a maximum voltage of 24 V (gold contacts) with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs and mobile hydraulics
Up to 24 V
Spade terminals
Ranges from 0,3..1,5 bar to 50..200 bar
Changeover (SPDT) with gold contacts
Over pressure safety from 100 bar up to 600 bar
The Model EH23 is a three way normally closed (3/2 NC) high pressure dual-operator stainless steel solenoid valve with 1/8 NPT or 1/4" NPT ports in a manifold body, suitable for hazardous locations. Various coil options available.
1/4" NPT porting
Flame-Proof Construction with 1/2″ NPT conduit
Precision stainless free floating plunger
5000 PSI burst pressure