Active filters

8100 pH & Temperature Meter Kit

Complete kit for pH and temperature measurement
  • pH electrode and temperature probe included
  • Automatic calibration for hassle-free accuracy
  • Automatic temperature compensation for added precision
  • Accuracy: ±0.05 pH
  • Temperature range: 0 to 99 °C
  • Dual measurement kit

£145.00 Price
view product

Thermapen® Classic | Strong Probe

The Thermapen Classic strong penetration probe thermometer provides the same benefits as the Thermapen Classic thermometer, but comes with a general-purpose strong temperature probe, rather than the reduced tip. It is ideal for insertion into both solids and liquids

  • Over 50% faster than traditional probes
  • Reaches temperature in just 3 seconds
  • Lightweight and easy-to-use
  • Free traceable calibration certificate
  • Biomaster product protection
  • Meets the European Standard EN 13485
  • °C to °F switchable 
  • 1.0° or 0.1° switchable resolution
  • Free protective Pouch included

£72.00 Price
view product
  • REQUEST A QUOTE

TC08, TC15 Series Directional Spool Valve

5/3 5/2

Aventics directional spool valve, TC15 and TC08, is electrically operated and available in solenoid / solenoid and solenoid / solenoid spring. Available as sealed mid position of closed centre, exhausted centre and pressurised centre. With compressed air connections 1/8" - 1/4" and 5/2 and 5/3.

  • Connection 1/8 ", 1/4"

    Flow capacity 800 l/min

    Temperature range -10°C to +50°C

IP65
£0.00 Price
view product
  • REQUEST A QUOTE

Multisignal For LCM Series

This universal signal processor was designed as interface for continuous level sensors with potentiometric output (LC series). Subsequently evolved until the current version that can be interfaced with any sensor or signal transmitter. This electronic unit handles standard industrial signals 0-5V, 0-10V, 0-20mA, 4-20mA, frequency and potentiometers.

£0.00 Price
view product
  • REQUEST A QUOTE

Suco - 0132/0133 Pressure Switch

IP67

The 0132/0133 series pressure switch is part of the integrated connector range from SUCO offering high IP rating. Integrated TE AMP Superseal 1.5® connector and a maximum voltage of 48 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.

Up to 48 V

TE AMP Superseal 1.5® integrated connector

Five adjustment ranges from 0,3..1,5 bar to 50..200 bar

Changeover (SPDT)

Over pressure safety from 100 bar up to 600 bar

£0.00 Price
view product

Chemical Vehicle Spill Kit 1

Our Drizit chemical vehicle spill kit is suitable for dealing with spills of carried goods or of a vehicles own fluids.

Container: This spill kit comes in a 3mm high density polythene container in grey with nylon coated handle and stainless steel fastener. Extended sides for ease of mounting on outside of vehicles, on trailer or rear end of cab.

£268.00 Price
view product

Oil Spill Kit 1100

Our Drizit Oil Spill Kit 1100 is designed to deal with any spill that may occur on site:

  • hoses blowing during delivery
  • tank overfills
  • tank rollovers
  • catastrophic incidents caused by vandalism or accident.
  • these large kits can deal with anything.

This oil spill kit is the ideal basis for environmental management systems.

Container: Large, heavy duty container that is UV stabilised, water tight and lockable. Comes complete with heavy duty wheels for all surfaces.

£955.00 Price
view product

Thermapen® | Surface Probe

Thermapen Surface is the Thermapen Classic with a surface temperature probe

  • Ideal for grills, griddles, hotplates, pipe temperatures etc
  • Temperature range -49.9 to 299.9 °C
  • Lightweight, compact & easy to use
  • Foldaway stainless steel probe
  • Probe dimensions 8mm diameter x 95mm
  • Polygiene Biomaster Product Protection 
  • 2 year guarantee
  • Free protective Pouch included

£72.00 Price
view product
  • REQUEST A QUOTE

740 Series Diaphragm Seat Valve

Plastic diaphragm seat valve for pneumatic applications from our manufacturer Aventics.

The body and connections are made of plastic, which means that the 740 series has a low weight and is corrosion-resistant.

High flow capacity, fast response time, and built-in flow adjustment as standard, which makes it a flexible alternative in automation.

Series 740 can be selected with ATEX rated coil.

As standard, it is for independent installation, but can also be built on a specially adapted base plate with quick connections.

  • Connection Plug, EN 175301-803, form A

    Flow capacity 1100l / min

    Temperature range -25 to +50 °C

    ATEX available on request

Selectable with ATEX coil
£0.00 Price
view product
  • REQUEST A QUOTE

Suco - 0630/0631 Pressure Sensor

CANopen/CAN J1939 Series

Initially developed for automotive purposes CAN is a serial bus protocol which allows components such as sensors to communicate over a single or dual wired network to a vehicles system. This vastly reduces the amount of cable used, wiring time and connections used in standard wiring looms whilst still communicating data at high speeds.

Type 0630: CANopen protocol according to CiA DS-301, Device profile according to CiA DS-404

Type 0631: CAN J1939 protocol according to SAE J1939

14 Standard pressure ranges from 0..1 bar up to 0..600 bar

M12 electrical connector
£0.00 Price
view product
  • REQUEST A QUOTE

Suco - 0134/0135 Pressure Switch

IP67

The 0134/0135 series pressure switch is part of the integrated connector range from SUCO offering high IP rating. Integrated M12x1 connector and a maximum voltage of 48 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.

Up to 48 V

M12x1 integrated connector

Five adjustment ranges from 0,3..1,5 bar to 50..200 bar

Changeover (SPDT)

Over pressure safety from 100 bar up to 600 bar

£0.00 Price
view product

Refill for Oil Spill Kit 1100

Refill contents

  • 400 oil absorbent pads
  • 2 oil absorbent mini rolls
  • 1 oil absorbent roll
  • 10 oil absorbent socks
  • 4 oil absorbent booms
  • 10 oil absorbent cushions
  • 2 Dammit® mats
  • 10 disposal bags and ties
  • 2 stakes
  • 800g Dammit® ready mix

£576.00 Price
view product

Thermapen® | Air Probe

Thermapen Air, thermometer with air temperature probe

  • Ideal for HVAC applications
  • One-handed operation
  • Auto-power on/off facility
  • Foldaway stainless steel probe
  • Lightweight, compact and easy to use
  • Biomaster product protection
  • 2-year guarantee
  • Free protective Pouch included

£72.00 Price
view product
  • REQUEST A QUOTE

840 Series Directional Valve

Solenoid/spring diaphragm valve

Aventics Directional Valve - Series 840 - 4/2 - Solenoid/Spring Diaphragm Poppet Valve. Available in 24vDC, 24vAC, 110vAC and 220/230vAC.

Compressed Air Connection 6x1

IP65

Temperature range -15°C to +50°C

Nominal Flow Qn = 200 l/min

£0.00 Price
view product
  • REQUEST A QUOTE

Aplisens - APR-2000ALW Smart Differential Pressure Transmitter

The Aplisens APR-2000ALW Smart differentail pressure sensor is applicable to the measurment of the pressure, underpressure and absolute pressure of gases, vapours and liquids. 

This pressure sensor comes with many extra options such as PED, SIL 2, ATEX, DNV marine certificate, housing options, thread connections and materials making this sensor very versatile.

HART or profibus

Rotatable display

Various process connections

Ten standard pressure ranges

£0.00 Price
view product
  • REQUEST A QUOTE

Magnetostrictive Level Sensor - LCM-S Series

Magnetostrictive continuous level transmitters base their operation on the physical principle called Wiedemann effect and allow a continuous and precise measurement of liquid levels. The electronic unit sends a pulse to a waveguide contained in the measuring rod; the magnetic float intercepts the pulse generating an echo that is detected by the same electronic unit. The elapsing time between the emission of the pulse and its recognition is directly proportional to the position of the float, and then to the value of the level to be measured.

Stainless steel ─ AISI 316

2 analog outputs, current and voltage

RS485 serial output, Valco protocol

Up to 2, 9 m length

Working pressure up to 50 bars depending on the used float

£0.00 Price
view product

Chemical Spill Kit 1100

Our Drizit Chemical Spill Kit 1100 is designed to deal with msot hazardous chemical spills that may occur on site and is the ideal basis for environmental management systems.

  • hoses blowing during delivery of chemical
  • chemical tank overfills
  • chemical tank and drum roll overs
  • catastrophic incidence caused by vandalism or accident.

Container: Large, heavy duty 1100 litre container that is UV stabilised, water tight and lockable. Comes complete with heavy duty wheels for all surfaces.

£894.00 Price
view product