Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
There are 605 products.
Active filters
Our range of Oil Gator spill kits, along with Drizit polypropylene absorbent, contain Oil Gator hydrocarbon absorbent offering significant technical and commercial benefits to spill responders, contaminated land clean up, oil sludge and hydrocarbon contaminated waste treatment.
Our Drizit Chemical Spill Kit 660 is primarily used for dealing with hazardous chemical spills that pose an environmental threat in areas such as:
However, due to its size, shape and portability this is an ideal spill kit for internal use and anywhere where volumes of hazardous liquids are stored, delivered or received.
Container: Heavy duty, UV stabilised highly visible, water proof 660 litre container.
MicroTherma Thermometer with in-built microprocessor for automatic re-calibration
MicroTherma 1 is sold excluding probe
Brass
Electrically Actuated 3 Way L‐Port Ball Valve ‐ only the centre port can be used as an inlet. High multi voltage. Rated IP66. Working pressure 16 bar. Working temperature from ‐20°C to +120°C. Fluid range: air, water, oil, gas, petroleum and petrochemical products. Threaded ends as per UNI/ISO 7/1 Rp (BSPT). Available in sizes 3/8", 1/2", 3/4", 1", 1.1/4", 1.1/2", 2".
Size 3/8" to 2"
IP66 rated protection
Working pressure up to 16 bar
Working temperature -20°C to +120°C
Level measurement with capacitive technology.
The liquid to be monitored must have a minimum conductivity of 50 µS / cm and must not be adherent to the probe.
All programming functions can be managed from the keypad on the front panel of the instrument. Level status is displayed on the LCD. The analog signal is proportional to the measured level, and can be calibrated according to the geometry of the tank. The absence of moving parts offers a system that does not require particular maintenance
Measuring ranges 100 … 3000 mm
Programming via the front panel keypad and LCD display
0-10 V or 4-20mA analog output
Measuring units programmable in linear values or %.
Stainless steel body
The 0186/0187 series pressure switch is part of the changeover contact range from SUCO. Offering a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and also adjustable on site and can come pre-set.
Common applications include medical, chemical and water applications
Up to 250 V
Spade terminals
Five adjustment ranges from 0,5..5 bar to 50-200 bar
Changeover (SPDT)
Over pressure safety of 300 bar or 600 bar
These level switches, with their reduced dimensions and simplicity of installation, constitute a reliable solution for the control of liquids in all applications where it is necessary to mount a lateral type. Suitable for use with process temperatures up to 120 ° C
PP housing with PG9 electrical connection
Micro-switch SPDT
Max working pressure 20 bar
Max working temperature 120°C
Process connection Brass or St. Steel materials
Refill contents
Precision PT100 high accuracy thermometer
Price is for instrument only with free traceable certificate
Brass
Electrically Actuated 3 Way L‐Port Ball Valve ‐ only the centre port can be used as an inlet. Low multi voltage. Rated IP66. Working pressure 16 bar. Working temperature from ‐20°C to +120°C. Fluid range: air, water, oil, gas, petroleum and petrochemical products. Threaded ends as per UNI/ISO 7/1 Rp (BSPT). Available in sizes 3/8", 1/2", 3/4", 1", 1.1/4", 1.1/2", 2".
Size 3/8" to 2"
IP66 rated protection
Working pressure up to 16 bar
Working temperature -20°C to +120°C
The capacitive probes, SCV series, are a good solution to control the level of liquids such as water, oil, gas and solids such as powders and granular materials.
The probes are available in different lengths and their construction has been suitably designed to ensure high operational reliability in difficult conditions, such as those found on industrial plants.
IP65
The 0184/0185 series is part of the changeover contact range from SUCO with an integrated plastic body and connector. Offering a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs, mobile hydraulics, water systems, hydraulics generally and pneumatics.
Up to 250 V
Connector included (DIN 43650/Form A)
Five adjustment ranges from 0,3..1,5 bar to 50..200 bar
Changeover (SPDT)
Over pressure safety from 100 bar up to 600 bar
Our Drizit Maintenance Spill Kit 660 is primarily for outdoor use for containing and cleaning up of general liquids including non-corrosive liquids, hydrocarbons, solvents and other aqueous and organic liquids oil, chemical or general maintenance spills that pose an environmental threat in areas such as:
However, due to its size, shape and portability this is an ideal spill kit for internal use and anywhere where volumes of liquids are stored, delivered or received.
Container: Heavy duty, UV stabilised highly visible, water proof container.
Pro-Surface Thermapen surface thermometer for grills and hotplates
3/2" 5/3" 5/2"
Aventics Directional Spool Valve CD012 and CD07, is electrically operated and available in solenoid / solenoid or solenoid / solenoid spring connection and APB Closed Centre Sealed Mid Position. With varients including, 5/3, 3/2, and 5/2, and in 1/2 BSP and 1/4 BSP connection.
The optical sensors, SLO series, are a valid solution for level control of liquids, even for applications in small tanks. The optical sensor is located in a metallic body which includes a polysulfone prism inside of which there is inserted an infrared transceiver. As soon as the sensor is immersed in the liquid, the refraction index of the prism is changed and a large part of the infrared beam is dispersed in the liquid, causing the output to change state. The sensor is particularly suitable to be side mounted for control of translucent liquids even coloured.
No moving parts
Hermetic construction, sealed electronics
Minimum protection degree IP65
The 0184/0185 series is part of the changeover contact range from SUCO with an integrated plastic body and connector. Offering a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 stainless steel body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs, mobile hydraulics, water systems, hydraulics generally and pneumatics.
Up to 250 V
Connector included (DIN 43650/Form A)
Five adjustment ranges from 0,5..5 bar to 50..200 bar
Changeover (SPDT)
Over pressure safety of 300 bar or 600 bar
