Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
There are 605 products.
Active filters
Diaphragm (0H64) / Piston (0H69) Switch
Suitable for hydrogen applications
Up to 42V
Adjustment ranges up to 150 bar
Up to 600 bar over pressure safety
Normally open or normally closed
Refill contents
Therma differential thermometer two channel, T1 or T2 or T1 minus T2 differential thermometer
Sold excluding probes
With Valpes VSX electric actuator
A stainless steel flaged ball valve operated by a Valpes VSX electric actuator. Available in sizes 1/2" to 4"
Size 1/2" to 4"
IP68 rated protection
Operated by a Valpes VSX electric actuator
Available in sizes 1/2" to 4"
Control units for SL model
The VNR21/22 control units are designed as interface for the SL series (conductive level probes). These electronic units are used to control liquids that have a minimum electrical conductivity of 1 µS.
The system is based on measurement of the conductivity of the liquid to be controlled and works with low potential and with alternating currents, in order to avoid the incrustation of the electrodes and/or perforation of the tan.
One or two channel design
10-250 µS sensitivity range
Changeover (SPDT)
Gold contacts
The 0190/0191 series is a compact pressure switch and is part of the changeover contact range from SUCO. Offering a maximum voltage of 24 V (gold contacts) with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs and mobile hydraulics
Up to 24 V
Spade terminals
Ranges from 0,3..1,5 bar to 50..200 bar
Changeover (SPDT) with gold contacts
Over pressure safety from 100 bar up to 600 bar
Level controls with 2 electrical contacts, reliable, compact and easy to install. Designed to offer a range of level switches to meet the request for a cheap monitoring of the level in small tanks.
The principle of operation of these instruments is based on the drive of 2 reed contacts, located inside of the measuring rod, by a magnetic float. The only moving elements are the floats that move, for hydrostatic thrust, along the measuring rod; this guarantees extreme ruggedness and a limited need of maintenance
Float switch, N.1 contact self mounting kit
500 mm. to 1500 mm. tube length
Reed switch SPST or SPDT
Integrated temperature switch (on request)
Brass stem and connection, Spansil float
Our Drizit Oil Spill Kit 660 is primarily for outdoor use for dealing with oil spills that pose an environmental threat.
Use in areas such as:
However, due to its size, shape and portability this is an ideal spill kit for internal use and anywhere where volumes of liquids are stored, delivered or received.
Container: Heavy duty, UV stabilised highly visible, waterproof container.
Stainless steel
Valpes 2 Way 3 Piece Electrically Actuated Ball Valve. Rated IP66. Working pressure 1000 psi. Working temperature from ‐20°C to +200°C for fluids. Fluid range: water, gas and corrosive media. Threaded ends as per UNI/ISO 228 Rp (BSPP). Available in sizes 3/8", 1/2", 3/4", 1", 1.1.4", 2", 2.1/2", 3", 4".
Size 3/8" to 4"
IP66 rated protection
Working pressure up to 1000 psi
Working temperature -20°C to +200°C
The visual level indicators ILC series are used to visually monitor the status of the level of liquids in tanks, and are equipped with a minimum or maximum level switch. The indicators are mounted outside the tank by means of threaded connections. The system thus designed allows the vision of the level inside the tank at 360°.
Version with switch MIN/MAX
127 mm. to 1000 mm. length
Working pressure up to 2 bar
Working temperature up to 80°C
Stainless steel body
The 0196/0197 series is a compact pressure switch and is part of the changeover contact range from SUCO. Offering a maximum voltage of 24 V (gold contacts) with a normally open and normally closed contact housed in a hex 27 stainless steel body offering offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs and mobile hydraulics
Up to 24 V
Spade terminals
Five adjustment ranges from 0,5..5 bar to 50..200 bar
Changeover (SPDT) with gold contacts
Over pressure safety of 300 bar up to 600 bar
Our Drizit Maintenance Spill Kit 200 bunker spill kit is suitable for indoor and outdoor use for storing spill kit products for containing and cleaning up of general liquids including non-corrosive liquids, hydrocarbons, solvents and other aqueous and organic liquids.
Container: Bins provide for easy access to absorbents and forklift access makes positioning easy. Locks are available for these products for added security. Bunkers are made from 100% PE with angled lid allowing water to run off.
Refill contents
Stainless steel
Valpes 2 Way 3 Piece Electrically Actuated Ball Valve. Rated IP66. Working pressure 1000 psi. Working temperature from ‐20°C to +200°C for fluids. Fluid range: water, gas and corrosive media. Threaded ends as per UNI/ISO 228 Rp (BSPP). Available in sizes 3/8", 1/2", 3/4", 1", 1.1.4", 2", 2.1/2", 3", 4".
Size 3/8" or 4"
IP66 rated protection
Working pressure up to 1000 psi
Working temperature -20°C to +200°C
The visual level indicators ILC series are used to visually monitor the status of the level of liquids in tanks. The indicators are mounted outside the tank by means of threaded connections. The system thus designed (double vision pipe) allows the vision of the level inside the tank at 360°
127 mm. to 1000 mm. length
Aluminium anodized body, other on request
Working pressure up to 2 bar
Working temperature up to 80°C
Acrylic sight and protection tube
Long service life
The 0180/0181 series is a compact pressure switch and is part of the changeover contact range from SUCO. Offering a maximum voltage of 250 V with a normally open and normally closed contact housed in a hex 27 zinc plated body offering a high pressure resistance. The switch point is very stable even after a long period of time and high load and is also adjustable on site and can come pre-set.
Common applications include power packs, mobile hydraulics, water systems, hydraulics generally and pneumatics.
Up to 250 V
Spade terminals
Five adjustment ranges from 0.3-1.5 bar to 50-200 bar
Changeover (SPDT)
Over pressure safety from 100 bar up to 600 bar
