Split wafer

Fast Acting Design with max pressure to 360 mbar. Automatic gas solenoid valves are used for safety and control of gas for shut-off in gas feed pipes.Suitable for various gases, including Natural Gas, Propane and LPG Gas. Two way normally closed design. Fitted with 1/4" plug ports for pressure gauge and fitting to proving and interlock system. Available in sizes from 3/8" to 3" in Automatic (up to 8" in Flanged)

Max pressure to 360 mbar

Suitable for a variety of gases

Two way normally closed design

Available in sizes from 3/8" to 3" in Automatic

PCE-28 series from Aplisens, is a robust and versatile pressure transmitters of the highest quality with good accuracy.

Can be used for relative pressure, negative pressure and absolute pressure of air, water, oil and gas.

Any range from 0...25 mbar up to 0...1380 bar

Max. deviation 0.2%

Air, water, oil and gas

Minimum span 25 mbar

Also in ATEX / IECEx / EXD

• Handle for butterfly valves stainless and plastic
• Gaskets for butterfly valves
• Sliding sleeve for butterfly valves

Flanged gas solenoid valve from Banico Controls in an automatic and two way normally closed design. Used for safety and control of gas for shut-off in gas feed pipes. Suitable for various gases, including Natural Gas, Propane and LPG Gas.

Max pressure to 360 mbar

Suitable for a variety of gases

Two way normally closed design

Available in sizes from 3/8" to 3" in Automatic

The Aplisens APRE-2000G Smart differential pressure transmitter is applicable to gases, to the measurements of their pressure, underpressure and differential pressure.

 The ability to select the radical conversion characteristics also enables this differential pressure transmitter to be used in gas flow measurement systems using reduced pipes or other impeding elecments

• Pressure range -100 mbar to 100 mbar
  
  Min range 0.2mbar
  
  Three body styles available
  
  ATEX version

A high quality stainless steel split body ball valve (PN 16-40 / ANSI 150-300 or PN 63 - 100 / ANSI 600 flanges) manufactured on site at Omal in Italy. The Thor is a non protruding full bore floating ball valve suitable for many applications including oil and gas / petrochemical. Certifications include European Directive 97/23 EC PED, Fugitive Emission UNI EN ISO 154848 (2006), TA-LUFT VDI 2440 (2000), Fire Safe API 607:2005 ISO 10497:2010 - API6FA:1999, API6D: Certification 6D-1007 (Valves with ANSI). ATEX available. Also available in Reduced Bore.

PN 16-40 / ANSI 150-300 or PN 63 - 100 / ANSI 600 flanges

Non protruding full bore floating ball valve

Anti static device and anti blow out stem

ATEX available

The Closed position switch can be used with Banico Controls ZEV gas solenoid valves to indicate position of valve.

Operational voltage 250Vac 3A

Ambient temperature: -15 to +60°

Available in a variety of sizes

Micro switch Enclosure IP65

The Aplisens APC-2000ALW Smart pressure transmitter is applicable to the measurment of the pressure, underpressure and absolute pressure of gases, vapours and liquids.This pressure sensor comes with many extra options such as PED, MID, SIL 2, ATEX, DNV marine certificate, housing options, thread connections and materials making this sensor very versatile.

HART protocol

Rotatable display

Option: SIL 2, DNV, PED, ATEX

Range -7-+7mbar up to 0-1000bar

These hygienic butterfly valves are manufactured on site in Germany to the highest standards. They're available in sizes 1" to 6" with an O.D tube of 1/2" to 6".

• Available in sizes 1" to 6"
  
  
• Single or double acting
   
• Chambered low wear seal
  
  
• High pressure resistance  

Trunnion Mounted Ball Valve in coated steel. ANSI 150 - ANSI 1500 DN50 to DN300. Features two or three piece split body, full bore or reduced bore, double block & bleed. Stem seals FKM O-rings with TFM 1600 V-ring anti blow out stem. ATEX certified, API 6D Certificate 6D-1007. This trunnion mounted ball valve is suitable for petrochemical plants, oil and gas production, power plants, liquids, gas, steam, hydrocarbons.

Sizes DN50 to DN300

Pressure class ANSI150 to ANSI1500

Two or three pieces split body

ATEX certified

The Aplisens PRE-28 Smart differentail pressure sensor is applicable to the measurment of the pressure, underpressure and absolute pressure of gases, vapours and liquids. 

This pressure sensor comes with many extra options such as ATEX, DNV marine certificate, housing options, process connections and materials making this sensor very versatile.

Nine standard pressure ranges

HART protocol

ATEX & DNV versions

0.1% accuracy

High Pressure butterfly valves in high quality stainless steel. Available in sizes 1" - 4".

• Sizes 1" - 4"
  
  
• Nominal widths: DN25-100
  
  
• High pressure resistance up to 33 bar/housing PN40
  
  
• Low-wear seals 

Several different applications require hydrogen-compatible transmitters and transducers, including hydrogen refuelling, hydrogen engines, marine vehicles, hydrogen fuel cells, and laboratory environments.

Using hydrogen as a source of energy can dramatically reduce the amount of CO2 emissions and make it more affordable, secure, and cleaner. In order to fulfil this commitment ESI offers a product range which combines versatility and environmental friendliness with the same exceptional performance and stability for which they are known for.

Compatible for use within Hydrogen based environments

Tested to ISO 1114-2:2017 according to EC79/2009 and EU406/2010

Pressure ranges up to 25 bar

High resistance to overpressure and pressure transients