Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
Say something...
Nothing found. Please repeat.
Unsupported browser. Sorry...
There are 181 products.
Active filters
GMH 3710, GMH 3750
Reference measuring device in liquids, soft media, air / gas
Data logger function available (GMH 3750 version only)
Scope of supply: Device, battery, calibration protocol, manual
Highest accuracy : Resolution - 0.01 °C
The transmitter is a two channel controller that supports two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure, Level, Dissolved Oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo® Signal Converter. The 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer based relay functions. Derived function allows for the control of a relay or current loop with the sum, delta (difference), or ratio of two measurements, for example delta pressure and delta temperature. Multiple relay modes allow up to three signals to be used for the control of a single relay.
Factory set
The SUCO 0500/0501 performance series electronic pressure switch offers a small compact electronic switch without compromising on quality which comes factory set (unadjustable by the user) with overpressure protection (up to 2x), has a long service life and is also attractively priced especially at high volumes. Using a ceramic sensor in thick film technology for a good operating temperature range and accuracy, there are six standard pressure ranges starting from 0..2 bar all the way up to 0..100 bar and a hysteresis of 1%-98%, available in normally open or normally closed with a PNP transistor output.
Single switch point
Small & compact
Ceramic sensor
Stainless steel housing
Piston Switch
Suitable for hydrogen applications
Up to 250V
Adjustment ranges up to 400 bar
Up to 600 bar over pressure safety
Changeover (SPDT)
P9200 Series Pressure Meters for measuring positive and negative differential pressure
The type G is a normally closed solenoid valve for controlling the flow of water, air, gas, solvents, vacuum and many other fluids. Buna N seating of the pilot and main orifices make the valves ideal for TIGHT SEATING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero pressure.
Full Port Normally Closed Valve ½” to 3” NPT
Maximum static pressure 150PSI
Valve operates from zero pressure.
Valve Body – Cast Bronze, Globe Pattern – NPT ends
Maximum pressure 3 bar (PS)
Suitable to shut off liquid and gaseous fluids
Ambient temperature -10°C to +60°C
IP40
The type S is a normally closed solenoid valve suitable for controlling the flow of steam. Steam must be free of sediment. Valve operates from zero pressure.
Paddle
Model UM3K is a mechanical flow switch with very low pressure drop. This type of switch is used in applications including industrial cooling systems. Available in nickel-plated brass and stainless steel.
Switching Range 4..93 l/min H₂O
Water (oils, gases and aggressive media available on request)
G⅜" up to G1"
Brass or Stainless Steel Wetted Parts
Max Pressure 25 bar
Magnetic-Inductive
Model FIS is a flow sensor in stainless steel with absolutely no moving parts. It has been developed to measure, among other things, water flows in large pipe dimensions.
Special versions
•Clamp connection for plastic tube
For liquids up to 25 bar
For DN 50-400
The WR1 mechanical flow indicator is designed for use with water, oils and air/gases to show a quantitative flow display though a spinning rotor.
The Closed position switch can be used with Banico Controls ZEV gas solenoid valves to indicate position of valve.
Operational voltage 250Vac 3A
Ambient temperature: -15 to +60°
Available in a variety of sizes
Micro switch Enclosure IP65
![ASCO - 2/2 Direct/Servo-Acting 3/8\"-1\"](https://pwmtradinggroup.co.uk/1061-home_default/asco-2-2-direct-servo-acting-3-8-1.jpg "ASCO - 2/2 Direct/Servo-Acting 3/8\\"-1\\"")
Normally closed W
Working pressure 0 to 24 bar
Housing in brass or stainless
Insulation class F 140°C
Maximum voltage 24V DC
Ambient temperature -10°C to +60°C
IP65
Diaphragm Pilot Operated Valve
2/2 Normally Closed G 1 1/4", G 1 1/2", G 2"
Full orifice
Suitable to shut off liquid and gaseous fluids
Operating Pressure Differential: Up to 10 bar
CANopen/CAN J1939 Series
Initially developed for automotive purposes CAN is a serial bus protocol which allows components such as sensors to communicate over a single or dual wired network to a vehicles system. This vastly reduces the amount of cable used, wiring time and connections used in standard wiring looms whilst still communicating data at high speeds.
Type 0630: CANopen protocol according to CiA DS-301, Device profile according to CiA DS-404
Type 0631: CAN J1939 protocol according to SAE J1939
14 Standard pressure ranges from 0..1 bar up to 0..600 bar
GMH 5530
Suitable for applications including, waters measuring - fishkeeping, aquafarming, drinking water monitoring, pharmaceutics, chemistry
Connections for pH and Redox, Temperature, interface / supply
Scope of supply: Device, battery, calibration protocol, manual
Additional Display for pH-Electrode and Battery: Bar graph displa
GDH 200-07, GDH 200-13
Differential and relative pressure measurement
Sensor: piezoresistive relative pressure sensor
Scope of supply: Device, battery, calibration protocol, manual
3 selectable measuring units: mbar, mmHg, PSI (GDH 200-07 also includes Pa)
